Track & Ballast (101 items)

Used to equalise differences in length of the flex track 61106.

Straight track G1. Length 230 mm (standard length).

Straight track G½. Length 115 mm (half standard length).

Straight track DG1, diagonal straight element. Length 119 mm. The diagonal straight track makes the extension of the distance between the parallel tracks possible but the rail siding still remains ...

Curved track R2. Radius 358 mm, arc angle 30°. 12 pieces are needed to form a full circle.

Curved track R4. Radius 481.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.

Curved track R4. Radius 481.2 mm, arc angle 30°. 12 pieces are needed to form a full circle.

Adapter track for straight turnouts, threeway-turnout and double-slip.

Curved track R9. Radius 826.4 mm, arc angle 15°.

Curved track R10. Radius 888 mm, arc angle 15°. Opposite curve for 15° turnouts and crossings.

Short compensation piece for the use of the geoLine tracks on NOCH layouts.

Short compensation piece for the use of the geoLine tracks on NOCH layouts.

Adapter track G100 between geoLine tracks and ROCO LINE tracks, length: 100 mm.

Curved track R10 with bedding. Radius 888 mm, arc angle 15°. Opposite curve for 15° turnouts and crossings.

Curved track R20 with bedding. Radius 1962 mm, arc angle 5°. Two piece constitute complementary curve for 10° turnouts and crossings.

Prototypical stable construction for all Gauge H0 track systems. Including 2 brake shoes to clip onto the rail.

To finish of the tracks properly in the case of track bumpers, display case track etc.

Straight track G4. Length 920 mm (4x standard length).

With the dampening elements the geoLine-tracks can be additionally insulated against the ground in order to reduce the transmission of driving noises.

With built-in reed switch, to be actuated by means of a 42256 magnet.This potential-free switching contact can be installed at any point of a track layout. The size and colour of the sleeper goes w...

Universal bedding switch drive. Low switching current consumption, limit switch. Note please: Like all ROCO switch drives, this drive of course features a limit switch. However, as the adjuster of ...

Flexible installation in straight and curved tracks Can be used from radius 2 (r= 358 mm)

Length 200 mm (standard length), branch radius 502.7 mm, branch angle, 22.5°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The p...

Length 200 mm (standard length), branch radius 502.7 mm, branch angle, 22.5°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The p...

Triggers a switching pulse while running axles with a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions. With fault clearance to av...

Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly ...

Crossing K15. Length 230 mm (standard length), crossing angle 15°. The railroad lines that cross each other are not electrically isolated. By using a 10019 relay it is possible to polarize the frog...

Electric uncoupler track, length: 100 mm, with electric motor. Digitally switchable with uncoupler decoder 61197.

Extension set for the AC turntable 665201 for 3-rail AC operation with nickel silver tracks. The set contains 3 exit tracks and 3 over-run ends.

Turnout left hand Wl10 with bedding, manually operated. Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°. An 5-mm spacer element (D5) is included for diagonal ins...

Single slip turnout EKW15 with bedding, manually operated. Standard design with internal switch rails Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm. For diagonal install...

Radius of the main track and the branch line 434.5 mm, arc angle 30°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The polarizat...

Curved turnout right hand BWr5/6, without turnout mechanism. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechani...

Curved turnout left hand BWl3/4 with bedding, manually operated. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable electric turnout drive: 42620 or 42624.

Curved turnout right hand BWr3/4 with bedding, manually operated. Radius of main track and branch track 419.6 mm (R3), arc angle 30°. Suitable electric turnout drive: 42620 or 42624.

Curved turnout left hand BWl5/6 with bedding, manually operated. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable electric turnout drive: 42620 or 42624.

Curved turnout right hand BWr5/6 with bedding, manually operated. Radius of main track and branch track 542.8 mm (R5), arc angle 30°. Suitable electric turnout drive: 42620 or 42624.

Curved turnout right hand BWr9/10, without turnout mechanism. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechan...

Curved turnout left hand BWI9/10, without turnout mechanism. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable turnout mechanism: 40295 or 40296 (electric turnout mechani...

Curved turnout left hand BWl9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable electric turnout drive: 42620 or 42624.

Curved turnout right hand BWr9/10 with bedding, manually operated. Radius of main track and branch track 826.4 mm (R9), arc angle 30°. Suitable electric turnout drive: 42620 or 42624.

Double slip turnout, manually operated. Length 200 mm (standard length), branch radius 502.7 mm, crossing angle 22.5°. The two manual turnout mechanisms can be replaced by the electric turnout mech...

Three-way turnout, symmetrical, manually operated. Length 200 mm (standard length), branch angle, 22.5° each, branch radius 502.7 mm each. The two manual turnout mechanisms can be replaced by the e...

Asymmetrical three-way turnout DWW15 without turnout mechanisms. First divergence to the left, second divergence to the right. Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873....

Double slip turnout DKW15, without turnout mechanisms. Design “Baeseler” with closure blades located at the outside. Length 230 mm (standard length), crossing angle 15°, effective branch radius 105...

Asymmetrical three-way turnout DWW15 with bedding, manually operated. First divergence to the left, second divergence to the right. Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius...