Track & Ballast (175 items)

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

2 pieces. 10 x 10 x 3 mm / approx. 3/8" x 3/8" x 1/8". This magnet is for activating the reed switch. It is for freight and passenger cars.

Straight track: 440 mm / 17-5/16“. Branch: right, R3, 22.5°. The turnout mechanism (LGB 12010) can be installed on the right or the left side of the turnout. The LGB control box (LGB 51755) or its ...

With H0 Scale Märklin as the first manufacturer has made sure that the dream of having your own model railroad is easier to fulfill: Sturdy enough to withstand the rough, everyday routine in the pl...

The rerailer ramp facilitates placing multi-axle locomotives and cars on the track. Length 30 cm / 11-1/16". Height 2.5 cm / 1".

Lighted lantern included. Maintenance-free LED. Length 38 mm /1-1/2". The track bumper can be clipped onto the rails. A wood screw for installation is included.

Length 38 mm / 1-1/2". The track bumper can be clipped onto the rails. A wood screw for installation is included.

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39". The 74040 feeder wire set can only be used with the older genera...

This decoder is for installation in a 24720 C Track wide-angle double slip switch or a 62720 Trix wide-angle double slip switch. The decoder can be used for the digital formats mfx, Motorola, and D...

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. ...

This is an improved kit for upgrading C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from an accessory controller (example: 72720) or by means o...

This is a kit for converting C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from a 72752 turnout control box with a feedback function or from a ...

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

This can be installed anywhere on the layout under the rails.

This is installed between the third rail clips at the ends of the track.

This is installed at rail joints between the third rail clips to separate track circuits. Contents 5 pieces.

One each right and left turnout lantern for installation on turnouts with the detachable turnout mechanism. The turnout lantern can be used with hand levers, the turnout mechanism, or the below-bas...

This kit is for installing two turnout mechanisms. It can be adjusted for boards from 8 to 25 mm /approx. 5/16" to 1". Installation template included.

This is an improved version of the turnout mechanism. This mechanism can be used with turnouts (new versions),the double slip switch, and the KOMBI extension set program. The mechanism has an autom...

The reed switch is for use at a suitable point with K Track or C Track. The reed switch triggers a pulse of current when a locomotive or car with a magnet mounted on the underside passes over it. T...

Contents: 10 pieces of each. These rail joiners and clips are for joints with other track when the flex track is cut.

These screws are for mounting track sections (H0) or for mounting bridge sections on bridge pillars (Märklin Z).

Length 110 mm / 4-3/8".

Length 55 mm / 2-3/16".

Length 25 mm / 1".

Length 108.6 mm / 4-1/4". For adjusting length on the 8559 crossing and 8560 double slip switch.

Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

Radius 145 mm / 5-3/4". 45°.

Radius 195 mm / 7-11/16". 45°.

Radius 195 mm / 7-11/16". 30°.

Radius 195 mm / 7-11/16". 30°. Terminal clips included. A passing train activates the function.

Radius 220 mm / 8-11/16". 45°.

Radius 220 mm. 30°.

Length 112.8 mm / 4-7/16". 13°.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4".

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1".

Length 55 mm / 2-3/16". A manual hand lever is included, or the unit can be remote controlled with the 7272/72720 control box.

Length 55 mm / 2-3/16". Terminal clips included. A passing train activates the function.