Track & Ballast (43 items)

The basic 300 mm / 11-13/16“ straight section is the foundation of the LGB track program. All LGB track sections are made with solid brass rails for reliable operation indoors and outdoors.

52 mm / 2-1/16“ long straight section of track for a variety of uses.

82 mm / 3-1/4“ long straight section of track.

This straight section of track can be adjusted quickly and easily to any length between 88 and 120 mm / 3-1/2“ and 4-3/4“. No tools are required to do this.

Both rails are separated or gapped on this section of track that can be used for many purposes. A hidden terminal clip facilitates electrical connections. The length of this section of track is 150...

One rail is interrupted or gapped on this section of track. The interrupter track can be used for the circuit for an insulated block in front of signals. A hidden terminal clip facilitates electric...

This track bumper with a lighted lantern can be mounted on straight sections of track.

This is a model of a track bumper with rails bent up as was done in the early days of railroading to safeguard the ends of sidings. Such track bumpers can still be found at stations.

This is a manual uncoupler for cars with standard LGB hook-and-loop couplers. The manual uncoupler can be installed in straight sections of track. When symmetrical couplers are installed, use two m...

The curved track in radius R1 is one of the basic pieces in the LGB track assortment. 12 sections of R1, 30° track make a circle (360°).

The radius R1, 15° curved track equals half of the R1, 30° curved track (LGB 11000).

The radius R1, 7.5° curved track equals 1/4 of the R1, 30° curved track (LGB 11000) or half of the R1, 15° curved track (LGB 11020).

Both rails are separated or gapped on this section of track that can be used for many purposes. A hidden terminal clip facilitates electrical connections. Radius R1, 15° curved track.

This electric turnout mechanism is easy to install on all LGB turnouts. You can even control your trains automatically by combining this mechanism with the LGB auxiliary switch (LGB 12070) and othe...

Straight side: 300 mm / 11-13/16“. Branch: right, R1, 30°. The turnout mechanism (LGB 12010) can be installed on the right or the left side of the turnout. The LGB control box (LGB 51755) or its eq...