Track & Ballast (43 items)

The basic 300 mm / 11-13/16“ straight section is the foundation of the LGB track program. All LGB track sections are made with solid brass rails for reliable operation indoors and outdoors.

52 mm / 2-1/16“ long straight section of track for a variety of uses.

82 mm / 3-1/4“ long straight section of track.

This straight section of track can be adjusted quickly and easily to any length between 88 and 120 mm / 3-1/2“ and 4-3/4“. No tools are required to do this.

Both rails are separated or gapped on this section of track that can be used for many purposes. A hidden terminal clip facilitates electrical connections. The length of this section of track is 150...

One rail is interrupted or gapped on this section of track. The interrupter track can be used for the circuit for an insulated block in front of signals. A hidden terminal clip facilitates electric...

This track bumper with a lighted lantern can be mounted on straight sections of track.

This is a model of a track bumper with rails bent up as was done in the early days of railroading to safeguard the ends of sidings. Such track bumpers can still be found at stations.

This is a manual uncoupler for cars with standard LGB hook-and-loop couplers. The manual uncoupler can be installed in straight sections of track. When symmetrical couplers are installed, use two m...

The curved track in radius R1 is one of the basic pieces in the LGB track assortment. 12 sections of R1, 30° track make a circle (360°).