Lights & Signals (527 items)

The signal has a semaphore and an open gray lattice mast. The signal changes from red (Hp 0) to green (Hp 1).

The signal has 2 independent semaphores and an open narrow mast. The signal changes from red to green or red to green/yellow.

The signal has 2 independent semaphores and an open lattice mast. The signal changes from red to green or red to green/yellow.

The signal has 2 independent semaphores and an open gray narrow mast. The signal changes from red (Hp 0) to green (Hp 1) or red (Hp 0) to green/yellow (Hp 2).

The signal has 2 independent semaphores and an open gray lattice mast. The signal changes from red (Hp 0) to green (Hp 1) or red (Hp 0) to green/yellow (Hp 2).

The signal mast has a movable front and rear lens.

For cars 4026, 4027, 4032, 4044, 4051, 4052, 4111 and 4112. Consists of a light bulb with a light socket, connecting wire, and a plug. A connecting socket for additional lights is included.

This lighting kit can be used with the 43581-43586 cars. It consists of a pickup shoe and current-conducting close coupler.

Universal circuit board with several LEDs, which will fit in most of the passenger cars in the Märklin H0 program. One 73400 is required for a short car (example: Langenschwalbach cars); for long c...

Universal circuit board with several white LEDs to fit in most of the passenger cars in the Märklin H0 program. One 73401 board is required for a short car (example: Langenschwalbach cars); two boa...

This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of t...

This is a simple track block signal without a mast for use in switch yards and station areas. The signal aspects change from Sh0 (red/red) to Sh1 (yellow/yellow). Track current can be controlled by...

This is a simple distant signal for use in front of home signals. The signal aspects change from Vr0 (yellow/yellow) to Vr1 (green/green). Track current can be controlled by means of the control bo...

This is a simple block signal for use on rail lines away from station areas. The signal aspects change from Hp0 (red) to Hp1 (green). Track current can be controlled by means of the control box. Ma...

This single-track railroad grade crossing has half gates and is fully assembled. This grade crossing can be connected directly to C Track. The grade crossing has 2 solenoid activated gates with 2 r...