Lights & Signals (39 items)

This kit is for all Minitrix passenger cars with current pickup from one each conductor per truck. It consists of an LED (warm white) light strip that can be shortened and pickup contacts. The LED ...

The signal has a movable disk. The signal changes from yellow/yellow to green/green. Stop-and-Go on the Rails. Just like the real life prototype, signals fulfill important control and safety functi...

The signal has a gray mast and a movable disk. The signal changes from yellow/yellow (Vr 0) to green/green (Vr 1).

The signal has a movable arm and movable disk. The signal changes from yellow/yellow to green/green or to yellow/green. It has 2 servos.

The signal has a gray mast with a movable arm and movable disk. The signal changes from (Vr 0) to green/green (Vr 1) or to yellow/green (Vr 2). It has 2 servos.

The signal has a semaphore and an open narrow mast. The signal changes from red to green.

The signal has a semaphore and an open gray narrow mast. The signal changes from red (Hp 0) to green (Hp 1).

The signal has a semaphore and an open gray lattice mast. The signal changes from red (Hp 0) to green (Hp 1).

The signal has 2 independent semaphores and an open narrow mast. The signal changes from red to green or red to green/yellow.

The signal has 2 independent semaphores and an open lattice mast. The signal changes from red to green or red to green/yellow.

The signal has 2 independent semaphores and an open gray narrow mast. The signal changes from red (Hp 0) to green (Hp 1) or red (Hp 0) to green/yellow (Hp 2).

The signal has 2 independent semaphores and an open gray lattice mast. The signal changes from red (Hp 0) to green (Hp 1) or red (Hp 0) to green/yellow (Hp 2).

The signal mast has a movable front and rear lens.

For cars 4026, 4027, 4032, 4044, 4051, 4052, 4111 and 4112. Consists of a light bulb with a light socket, connecting wire, and a plug. A connecting socket for additional lights is included.

This lighting kit can be used with the 43581-43586 cars. It consists of a pickup shoe and current-conducting close coupler.

Universal circuit board with several LEDs, which will fit in most of the passenger cars in the Märklin H0 program. One 73400 is required for a short car (example: Langenschwalbach cars); for long c...

Universal circuit board with several white LEDs to fit in most of the passenger cars in the Märklin H0 program. One 73401 board is required for a short car (example: Langenschwalbach cars); two boa...

This is a universal circuit board with several LEDs for installation in most passenger cars in the Märklin H0 assortment. A built-in buffer memory allows flicker-free operation. The brightness of t...

Prototype: German Federal Railroad (DB) standard design yard signal. Dwarf signal without a mast. 2 settings: "Stop" - red/red (Sh0) and "Proceed" - white/white (Sh1). Model: The signal has an inte...