Maintenance & Breakdown Essentials (3,797 items)

Use: Controlled screw tightening in the most common range of 5 - 125 N·m Serial / production-line Extremely long-term work Features: Pre-set production torque wrench - without scale 1/4", 3/8" or 1...

Nm min-max: 60 – 320 Nm ∙ Tolerance: 2 % ∙ Insert square 14 x 18 mm

Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustment, thereby representing more process reliability of t...

In plastic case Contents: 1 spindle, 1 cross-beam each 2- and 3-arm pattern and 9 slim pulling legs in 3 lengths Second spindle in the set 1.07/K safes working time 1.07/K-2 insert with nubs on bot...

Classified according to DIN EN ISO 6789-2:2017 Type II Class A, incl. traceable test certificate, calibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % req...

For Ø 12 - 35 mm. For extremely-tightly-packed ball bearings, bearing races, bushings, and shaft seals Simmering®. Sliding hammer 1.7 kg and counter-support brace. 1100 CT2-1.30 to retrofit existin...

These separator pullers are used together with the bearing separators 1.40 The tension bolts are screwed into the threaded holes in the bearing separators

Strong drop forged pattern Due to the bending-moment reinforcement on its back face, the energy-saving design of the cross-beam means even stronger and safer pulling work Scale for uniform adjustme...