 | | | | |
| Picture | | | |
|
|
|
|
|
€ 2.44*
per piece |
|
|
|
|
€ 2.95625*
per piece |
|
|
|
|
€ 3.13046*
per piece |
|
|
kwb 440390 (1 offer) TÜV Rheinland GS tested, DIN 838, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 3.70625*
per piece |
|
|
|
|
€ 3.77*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 4.39*
per piece |
|
|
kwb 451617 (1 offer) TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 4.63*
per piece |
|
|
kwb 450607 open end wrench (1 offer) TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 4.67*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 4.74*
per piece |
|
|
kwb 460208 combination wrench (1 offer) TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 4.78*
per piece |
|
|
|
|
€ 4.87*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 4.91*
per piece |
|
|
|
|
€ 4.93*
per piece |
|
|
|
|
€ 5.01*
per piece |
|
|
|
|
€ 5.13*
per piece |
|
|
|
|
€ 5.30*
per piece |
|
|
|
|
€ 5.32*
per piece |
|
|
|
|
€ 5.43*
per piece |
|
|
kwb 451011 (1 offer) OPEN END SPANNERS TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 5.43*
per piece |
|
|
Wiha 42463 nut driver Black, Red (2 offers) Makes handling easier Extra-long rotating cap ensures optimum feed. Increases your efficiency Screwdriver handle size concept for optimal balance between precision and control. Increases your effic... |
|
€ 5.63*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 5.74*
per piece |
|
|
kwb 460210 (1 offer) COMBINATION SPANNERS TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 5.85*
per piece |
|
|
|
|
€ 5.87*
per piece |
|
|
kwb 689606 hex key T-handle hex key Metric 1 pc(s) (1 offer) With hanger for the workshop wall, simply screw the plastic clip on the workshop wall. CrV steel, 2-component grip for high power transfer and slip-free working, chrome plated, short and long blade... |
|
€ 5.97*
per piece |
|
|
Gedore 6574090 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.07*
per piece |
|
|
|
|
€ 6.16*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.18*
per piece |
|
|
|
|
€ 6.26*
per piece |
|
|
Gedore 6583910 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
€ 6.32*
per piece |
|
|
|
|
€ 6.33*
per piece |
|
|
|
|
€ 6.34*
per piece |
|
|
|
|
€ 6.36*
per piece |
|
|
kwb 460212 combination wrench (1 offer) TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 6.36*
per piece |
|
|
kwb 470108 (1 offer) Matt chrome plated, both ends the same spanner size, special hollow profile with hexagon in handle, the short head is through-bored for accessing nuts on studs or close to edges, with wave profile,... |
|
€ 6.36*
per piece |
|
|
kwb 460213 (1 offer) COMBINATION SPANNERS TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 6.39*
per piece |
|
|
|
|
€ 6.48*
per piece |
|
|
kwb 440607 (1 offer) TÜV Rheinland GS tested, DIN 838, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 6.49*
per piece |
|
|
Gedore 6574330 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.55*
per piece |
|
|
Gedore 6573870 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.61*
per piece |
|
|
Gedore 6574410 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.63*
per piece |
|
|
|
|
€ 6.66*
per piece |
|
|
Gedore 6574170 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.70*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.74*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.78*
per piece |
|
|
|
|
€ 6.82*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.85*
per piece |
|
|
|
|
€ 6.86*
per piece |
|
|
|
|
€ 6.88*
per piece |
|
|
|
|
€ 6.88*
per piece |
|
|
kwb 460217 (1 offer) COMBINATION SPANNERS TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 6.88*
per piece |
|
