 | | | | |
Picture | | | | Order |
|
|
|
|
€ 2.48*
per piece |
|
|
|
|
€ 2.95625*
per piece |
|
|
|
|
€ 3.14046*
per piece |
|
|
kwb 440390 (1 offer) TÜV Rheinland GS tested, DIN 838, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 3.71625*
per piece |
|
|
|
|
€ 3.76*
per piece |
|
|
kwb 451617 (1 offer) TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 4.64*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 4.65*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 4.67*
per piece |
|
|
kwb 450607 open end wrench (1 offer) TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 4.69*
per piece |
|
|
kwb 460208 combination wrench (1 offer) TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 4.81*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 4.84*
per piece |
|
|
|
|
€ 4.90*
per piece |
|
|
|
|
€ 4.92*
per piece |
|
|
|
|
€ 5.00*
per piece |
|
|
|
|
€ 5.16*
per piece |
|
|
|
|
€ 5.33*
per piece |
|
|
|
|
€ 5.34*
per piece |
|
|
|
|
€ 5.44*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 5.63*
per piece |
|
|
Wiha 42463 nut driver Black, Red (2 offers) Makes handling easier Extra-long rotating cap ensures optimum feed. Increases your efficiency Screwdriver handle size concept for optimal balance between precision and control. Increases your effic... |
|
€ 5.67*
per piece |
|
|
kwb 460210 (1 offer) COMBINATION SPANNERS TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 5.85*
per piece |
|
|
|
|
€ 5.86*
per piece |
|
|
Gedore 6574090 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 5.94*
per piece |
|
|
kwb 689606 hex key T-handle hex key Metric 1 pc(s) (1 offer) With hanger for the workshop wall, simply screw the plastic clip on the workshop wall. CrV steel, 2-component grip for high power transfer and slip-free working, chrome plated, short and long blade... |
|
€ 5.99*
per piece |
|
|
|
|
€ 6.22*
per piece |
|
|
|
|
€ 6.23*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.26*
per piece |
|
|
|
|
€ 6.34*
per piece |
|
|
|
|
€ 6.37*
per piece |
|
|
Gedore 6583910 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
€ 6.37*
per piece |
|
|
kwb 460213 (1 offer) COMBINATION SPANNERS TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 6.39*
per piece |
|
|
Gedore 6574330 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.40*
per piece |
|
|
|
|
€ 6.40*
per piece |
|
|
kwb 460212 combination wrench (1 offer) TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 6.40*
per piece |
|
|
kwb 470108 (1 offer) Matt chrome plated, both ends the same spanner size, special hollow profile with hexagon in handle, the short head is through-bored for accessing nuts on studs or close to edges, with wave profile,... |
|
€ 6.40*
per piece |
|
|
Gedore 6573870 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.45*
per piece |
|
|
Gedore 6574410 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.46*
per piece |
|
|
|
|
€ 6.50*
per piece |
|
|
kwb 440607 (1 offer) TÜV Rheinland GS tested, DIN 838, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 6.50*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.53*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.59*
per piece |
|
|
Gedore 6574170 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.61*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.70*
per piece |
|
|
|
|
€ 6.71*
per piece |
|
|
|
|
€ 6.81*
per piece |
|
|
Gedore 6063830 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
€ 6.84*
per piece |
|
|
Gedore 6574840 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.89*
per piece |
|
|
|
|
€ 6.90*
per piece |
|
|
|
|
€ 6.91*
per piece |
|
|
|
|
€ 6.91*
per piece |
|
|
|
|
€ 6.92*
per piece |
|
|
|
|
€ 6.93*
per piece |
|
|
|
|
€ 6.93*
per piece |
|
|
kwb 460217 (1 offer) COMBINATION SPANNERS TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 6.93*
per piece |
|
|
Gedore 6574680 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.94*
per piece |
|
|
|
|
€ 6.94*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.98*
per piece |
|
|
|
|
€ 7.01*
per piece |
|
|
|
|
€ 7.02*
per piece |
|
|
|
|
€ 7.03*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 7.16*
per piece |
|
|
|
|
€ 7.24*
per piece |
|
|
|
|
€ 7.25*
per piece |
|
|
|
|
€ 7.26*
per piece |
|
|
|
|
€ 7.32*
per piece |
|
|
Gedore 6063750 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
€ 7.35*
per piece |
|
|
|
|
€ 7.36*
per piece |
|
|
|
Brüder Mannesmann M 120-04 |
€ 7.39*
per piece |
|
|
Wiha 341 Single (2 offers) Blade Chrome-vanadium steel, through hardened, chrome-plated. Deep drawn socket. Handle Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. Application Particularly suitable... |
|
€ 7.40*
per piece |
|
|
|
|
€ 7.41*
per piece |
|
|
|
|
€ 7.41*
per piece |
|
|
Wiha 341 Single (2 offers) Blade Chrome-vanadium steel, through hardened, chrome-plated. Deep drawn socket. Handle Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. Application Particularly suitable... |
|
€ 7.41*
per piece |
|
|
kwb 451317 (1 offer) TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 7.42*
per piece |
|
|
|
|
€ 7.43*
per piece |
|
|
C.K Tools T4343M 08H combination wrench (1 offer) Drop forged chrome vanadium steel, hardened & tempered for strength & durability. Heavy duty chrome plated for corrosion resistance. 12º offset bi-hex ring for access. |
|
€ 7.45*
per piece |
|
|
C.K Tools T4343M 06H combination wrench (1 offer) Drop forged chrome vanadium steel, hardened & tempered for strength & durability. Heavy duty chrome plated for corrosion resistance. 12º offset bi-hex ring for access. |
|
€ 7.48*
per piece |
|
|
kwb 689608 hex key T-handle hex key Metric 1 pc(s) (1 offer) With hanger for the workshop wall, simply screw the plastic clip on the workshop wall. CrV steel, 2-component grip for high power transfer and slip-free working, chrome plated, short and long blade... |
|
€ 7.49*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 7.53*
per piece |
|
|
|
|
€ 7.53*
per piece |
|
|
kwb 441213 (1 offer) TÜV Rheinland GS tested, DIN 838, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 7.55*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 7.56*
per piece |
|
|
kwb 689603 hex key T-handle hex key Metric 1 pc(s) (1 offer) With hanger for the workshop wall, simply screw the plastic clip on the workshop wall. CrV steel, 2-component grip for high power transfer and slip-free working, chrome plated, short and long blade... |
|
€ 7.57*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 7.71*
per piece |
|
|
LogiLink WZ0038 nut driver Stainless steel (3 offers) With a cable length of 1.5m the LogiLink power strip is perfectly suitable for indoor use. You can easily turn the socket on and off with the illuminated switch to save energy. |
|
€ 7.73*
per piece |
|
|
|
|
€ 7.74*
per piece |
|
|
|
|
€ 7.76*
per piece |
|
|
Gedore 6064210 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
€ 7.80*
per piece |
|
|
Gedore 6063670 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
€ 7.83*
per piece |
|
|
|
|
€ 7.85*
per piece |
|
|
Wiha 341 Single (2 offers) Blade Chrome-vanadium steel, through hardened, chrome-plated. Deep drawn socket. Handle Ergonomic Wiha SoftFinish® multi-component handle with roll-off protection. Application Particularly suitable... |
|
€ 7.86*
per piece |
|
|
|
Brüder Mannesmann M 120-06 |
€ 7.90*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 7.90*
per piece |
|
|
|
|
€ 7.91*
per piece |
|
|
Gedore 6575060 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 7.91*
per piece |
|
|
|
|
€ 7.93*
per piece |
|
|
C.K Tools T4343M 07H combination wrench (1 offer) Drop forged chrome vanadium steel, hardened & tempered for strength & durability. Heavy duty chrome plated for corrosion resistance. 12º offset bi-hex ring for access. |
|
€ 7.94*
per piece |
|
|
|
|
€ 7.96*
per piece |
|
|
|
|
€ 7.97*
per piece |
|
|
Brilliant Tools BT013710 combination wrench (1 offer) Manufactured in accordance with DIN 3113 Finely toothed with 72 teeth Backswing angle 5° Straight form Matt finish chrome-plated Chrome vanadium Spanner width 6 mm The BRILLIANT TOOLS ratchet ring ... |
|
€ 7.98*
per piece |
|
|
|
|
€ 7.98*
per piece |
|
|
