 | | | | |
| Picture | | | |
|
|
|
|
|
|
€ 6.34*
per piece |
|
|
|
|
€ 6.36*
per piece |
|
|
kwb 460212 combination wrench (1 offer) TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 6.36*
per piece |
|
|
kwb 470108 (1 offer) Matt chrome plated, both ends the same spanner size, special hollow profile with hexagon in handle, the short head is through-bored for accessing nuts on studs or close to edges, with wave profile,... |
|
€ 6.36*
per piece |
|
|
kwb 460213 (1 offer) COMBINATION SPANNERS TÜV Rheinland GS tested, DIN 3113 A, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts. |
|
€ 6.39*
per piece |
|
|
|
|
€ 6.48*
per piece |
|
|
kwb 440607 (1 offer) TÜV Rheinland GS tested, DIN 838, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
€ 6.49*
per piece |
|
|
Gedore 6574330 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.55*
per piece |
|
|
Gedore 6573870 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.61*
per piece |
|
|
Gedore 6574410 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.63*
per piece |
|
|
|
|
€ 6.66*
per piece |
|
|
Gedore 6574170 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
€ 6.70*
per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.74*
per piece |
|
|
STAHLWILLE 13 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
€ 6.78*
per piece |
|
|
|
|
€ 6.82*
per piece |
|
