Case Accessories (100 items)

With mounting option for screwed cable glands, for targeted cable infeed from appropriate equipment such as SK fan-and-filter units and enclosure heaters. In conjunction with screwed cable glands, ...

Rittal VX - Mounting kit magnet (pack of 2)

For time-saving and simple installation of the LED system light.

For time-saving and simple installation of the LED system light.

For time-saving and simple installation of the LED system light.

For simple, time-saving connection of the LED system light.

For simple, time-saving connection of the LED system light.

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed str...

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

For ventilation by convection, an outlet filter can be installed in the upper and lower sections of the enclosure.

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

Made of clear chromated steel strip, 75 mm² cross section, for cable shield contact.

For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

Made of clear chromated steel strip, 75 mm² cross section, for cable shield contact.

For simple, time-saving connection of the LED system light.

For time-saving and simple installation of the LED system light.

For vertical mounting on the threaded bolts of the door, for attaching support strips, punched sections with mounting flanges, 14 x 39 mm, door stay.

Pleated filter for fan-and-filter units, roof-mounted fans, cooling units and chillers The high-quality pleated filter technology permits a significant increase in the volumetric air flow compared ...

Rittal SK - Case fan - 60 mm

For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

SK enclosure heater, without fan, 49-50 W, 110-240 V, 1~, 50/60 Hz, WHD: 64 x 155 x 56 mm

Rittal - Rack fan speed controller

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

Rittal SK Hygrostat - Humidity sensor - RAL 7035

We recommend the use of washable metal filters, particularly in environments with dusty or oily ambient air. If air or steam condenses on the metal surfaces, any particles that may be present will ...

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 1160 m³/h, standard protection category IP 54.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 1160 m³/h, standard protection category IP 54.

PTC heater without fan, continuous thermal output 10 - 150 W, with quick-connection terminal.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

For ventilation by convection, an outlet filter can be installed in the upper and lower sections of the enclosure.

Rittal SK - Rack fan speed controller - AC 100-250 V

Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed str...

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

PTC heater with fan, continuous thermal output 235 - 800 W, and quick-connect terminal.

2 U tangential fan with up to 320 m3/h air throughput. The minimal noise generation of 52 dB makes it suitable for use in office environments.

Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed str...

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed str...

The new generation of roof-mounted fans is one system for all sizes: only one mounting cut-out is needed for all output categories. Air routing with minimal pressure losses ensures a high level of ...

The new generation of roof-mounted fans is one system for all sizes: only one mounting cut-out is needed for all output categories. Air routing with minimal pressure losses ensures a high level of ...

Rittal SK - Liquid cooling system heat exchanger - wall mountable - RAL 7035

Output classes 375 – 5,000 W. For use in tough environments. Convenient mounting options and flexible water connection options. Partial or full internal mounting possible.

Rittal SK - Thermoelectric cooler - RAL 7024

Output classes 375 – 5,000 W. For use in tough environments. Convenient mounting options and flexible water connection options. Partial or full internal mounting possible.

Energy-efficient Blue e wall-mounted cooling units in output categories from 500 W to 750 W, with integral e-Comfort controller and RiNano coating on the condenser as standard.

A revolution in energy efficiency using innovative hybrid technology. Average 75% energy savings with speed-regulated components and heat pipe technology. Unique multi-voltage capability for worldw...

A revolution in energy efficiency using innovative hybrid technology. Average 75% energy savings with speed-regulated components and heat pipe technology. Unique multi-voltage capability for worldw...

Energy-efficient Blue e roof-mounted cooling units in output categories from 500 W to 4,000 W, with integral e-Comfort controller, RiNano coating on the condenser and electrical condensate evaporat...

Energy-efficient Blue e+ wall-mounted cooling units in output categories 1600 W to 5800 W. Average energy savings of 75% can be achieved with speed-regulated components and heat pipe technology. Av...