Controls (CPU) (41 items)

Incremental Encoder Interface, Dimensions W x H x D: 24 x 64 x 100 mm, Operating temperature: 0...+55 °C, Operating voltage: 24 VDC, Series: WAGO 750, Protection rating: IP 20, Termination type: CA...

The WAGO‐I/O-SYSTEM 750 can also be used in shipbuilding applications and onshore/offshore installations (e.g., platforms, loading facilities). This is possible via certification under the standard...

The internal system supply module increases the current supply for the internal system by 2A. If the internal current consumption of all modules is higher than 2A, an additional supply module must ...

The supply module provides the I/O modules with the corresponding supply potential. The maximum current at the supply module is 6.3A. When configuring the system, it must be ensured that this total...

The supply module provides the I/O modules with the corresponding supply potential. The maximum current at the supply module is 10A. When configuring the system, it must be ensured that this total ...

After the fieldbus node is assembled with the correct buscoupler and I/O modules, the end module is snapped onto the assembly. It completes the internal data circuit and ensures correct data flow.

The analog output module generates signals of a standard magnitude ±10V. The output signal is electrically isolated and transmitted with a resolution of 12 bits. The internal system supply powers t...

The analog output module generates signals of a standard magnitude 4–20mA. The output signal is electrically isolated and transmitted with a resolution of 12 bits. Power is derived from the field s...

The analog output module generates signals of a standard magnitude 4–20mA. The output signal is electrically isolated and transmitted with a resolution of 12 bits. Power is derived from the field s...

The analog output module generates signals of a standard magnitude 0–20mA. The output signal is electrically isolated and transmitted with a resolution of 12 bits. Power is derived from the field s...

The analog output module generates signals of a standard magnitude 0–10V. The output signal is electrically isolated and transmitted with a resolution of 12 bits. The outputs are short-circuit proo...

The digital output module provides 8 channels in a width of just 12mm (0.47in.). The connected load is switched via digital output from the control system. All outputs are short-circuit-protected. ...

This digital output module transmits control signals from the automation device to the connected actuators. The internal system voltage triggers the relay. The NO contacts are electrically isolated...

This digital output module transmits control signals from the automation device to the connected actuators. The internal system voltage triggers the relay. The NO contacts are electrically isolated...